Harringay, Haringey - So Good they Spelt it Twice!
Looking for someone to turn a window into a door
Hi all, I'd like to turn a window into a door by removing the brickwork underneath the window and fitting a door. I already have a door in mind from a supplier, so the job would be to open the aperture, install the door, and fix any outstanding plaster issues on the outside. I don't know what kind of tradesperson would do this job usually - maybe just a general builder? Does anyone have any recommendations for someone who has done a job like this in the past?
Thanks for any pointers!
Replies to This Discussion
-
Permalink Reply by Christopher Fowler on
-
It's not quite as simple as you describe. You would need to remove the window frame, support the brickwork above the aperture, remove the brickwork below the aperture, fit a door-frame strong enough to support the brickwork above, and then fit the door. Personally, I'd advise getting a builder that's willing to take on a relatively small job. Small, but not necessarily inexpensive. Good luck.
-
Permalink Reply by jambo_sana on
-
Thanks. What do you mean when you say support the brickwork above? There is a lintel above the window, does it need to be supported further than that?
-
Permalink Reply by Vicki on
-
Christopher is right in what says. Give Mark Hudson a try 07957268699. He is very experienced and covers all aspects of building work. Highly recommended
-
-
Thank you - I'll give him a ring!
-
Permalink Reply by OneWomanAndHerDog on
-
A word of caution - I believe that this is subject to Building Regulations and will require Building Control to sign it off. A relatively straight forward process, but necessary for your house insurance and if you ever want to sell.
-
-
Yep, we are getting this signed off.
© 2024 Created by Hugh.
Powered by
